Purpose Of The Product; Safety Information - asecos APA.145.75 Manual De Instrucciones

1. Development and manufacture
asecos GmbH, D-63584 Gründau
Sicherheit und Umweltschutz
2. Serial number
The serial number can be taken from the type plate at the top right of the front side of the hazardous material workplace.

3. Purpose of the product

In accordance with the hazardous materials regulations and the workplace regulations and laboratory guidelines, ha-
zardous vapours, gases or suspended solids that are released must be fully captured at the place where they emerge or
where they are created before they can have effects that are damaging to health or to the environment. The hazardous
material workplace is a highly effective way of ensuring that no vapours, gases or suspended solids involved in handling
hazardous working materials (filling containers, gluing, cleaning, preparing, etc.) pollute the breathable air. Furthermore
it is ensured that no explosive gas-air mixtures can form inside. The user is protected from spraying chemicals and slivers
by the sliding window.

4. Safety information

• Take notice of the legislation and provisions to be applied in dealing with hazardous materials.
• Only use the hazardous material workplace in a proper condition.
• Make sure that there are no fresh air currents above 0.2 m/s when selecting the place of erection as this can affect
the functional capability.
• The user(s) is/are to be trained on handling of the hazardous material workplace.
• Observe the maximum weight with which the cabin may be loaded.
• Please check the material resistance of the surface of the hazardous material workplace for the use of aggressive
materials.
• Any hazardous materials that escape must immediately be collected and removed.
• Take note of all information in these operating instructions.
• Please follow the instructions of the safety specialists, technical monitoring services (BG, GAA, pharmaceutics coun-
cils), construction supervision etc.
• Please take notice of the accident prevention regulations and the workplaces ordinance
• The customer shall ensure the necessary exhaust and inlet air quantity.
5. Additional equipment, accessories
We offer you a variety of optional equipment as well as accessories for the ventilation-related connection of hazardous
material workplaces. Exhaust air sets recommended by asecos:
SET 1: HF.L.25157
- 1 m flexible hose DN100
- 2 hose clamps
- 1 wall duct
* SET 3 is a supplement for SET 2 for hose lengths up to 15 m
HF.L.20974 Conversion kit for the lateral lead-through of the exhaust air left/right
HF.ME.1565+75 Media connection for water with shut-off valve and drain valve for APA.145.75
HF.ME.1565+90 Media connection for water with shut-off valve and drain valve for APA.145.90
HF.ME.8237 Media supply 1 x natural gas for APA.145.75/90 with shut-off valve
HF.ME.1245+75
Media supply 1 x water, 1 x natural gas and water outlet for APA.145.75
HF.ME.1245+90 Media supply 1 x water, 1 x natural gas and water outlet for APA.145.90
HF.GE.9500 Laboratory bench (support frame) for APA.145.75, height-adj. 740–770 mm
HF.GE.8264 Laboratory bench (support frame) for APA.145.90, height-adj. 740–770 mm
HF.GE.12742 Laboratory bench (support frame) for APA.145.90, height-adj. 720–970 mm
HF.GE.15552 Support frame, standing work, (H x W x D) 865 x 900 x 625 mm
HF.GE.15810 Support frame, sitting work, (H x W x D) 685 x 900 x 625 mm
SET 2: HF.L.25158
- 7.5 m flexible hose DN125
- 2 hose clamps
- 1 wall duct
SET 3: HF.L.26693 *
- Tube fan 150
- 2 reducers DN150/125
- 7.5 m flexible hose DN125
- 2 hose clamps
- 1 wall duct
- 6 self-drilling screws 4.2 x 16
15