Bryton Rider 450 Guia De Inicio Rapido página 6

Data Sync
Sync Data to / from Bryton Active App
With the access to the internet, your Rider computer automatically updates
GPS data, uploads recorded tracks, and check for available firmware update.
It is required to add your device to your Bryton account before syncing data
for the first time.
To add.
1. Scan the QR code printed on the cover page of Quick Start Guide with your
smartphone to download Bryton Active App.
2. After Bryton Active App is installed, please sign up / log in for a Bryton
Active App account.
3. In the App, go to "Settings" > "Device Manager" > +
4. Select your device and tap "Yes" to add your device to your Bryton account.
5.Your device is successfully paired with Bryton Active App.
6. It would start uploading tracks from paired device.
To perform Data Sync, please first go to your device : Settings>Network>Con-
nect to set a wireless network connection, then go to Data Sync in the main
menu and let your Rider computer smartly guide you through the syncing
process.
Note: It usually takes longer to download and install Firmware updates, select
NO if you prefer to update it on your next sync.
Upload/Share Your Tracks via USB
1. Connect the device to your computer via USB cable.
2. Select fit files from Bryton folder in the device.
3. Upload files to brytonactive.com and popular training sites including
STRAVA, TrainingPeaks, Endomondo, Map My Ride, Fit track and many
more.