Knog The Bouncer Manual Del Usuario página 3

HOW TO LOCK YOUR BOUNCER
1. To unlock the Bouncer insert key and
rotate 180 degrees clockwise. Be sure to
hold the bottom half of the lock body as
it will become free from the shackle.
2. To lock the Bouncer you must reattach
the bottom half of the lock body, insert the
key and rotate 180 degrees counter-clock-
wise. Remove the key and CHECK THE LOCK
before leaving your bike to make sure it's
properly secured.
5
Position your bike against a solid, well-
anchored object (like a bike rail or tall sign
post) with the chainring facing outwards
Follow one of the lock-up procedures dis-
played for where to best place your Bouncer.
(Images displayed on the following page).
(A) Place KNOG Bouncer shackle around the
rail/post and a closed-loop section of your
bike frame. This is the quickest way to lock
up your bike but has the lowest security.
(B) Place KNOG Bouncer shackle around
the rail/post, through a closed-loop section
of your bike frame and through a wheel
(front or rear). This is a quick way to lock
up your bike with medium security.
(C) Remove your front wheel and place it
by your rear wheel. Place KNOG Bouncer
shackle around the pole and through both
seat stays or seat tube (if frame size will al-
low) and the two wheels. This method takes
a little bit more time to lock up your bike
but has high levels of security.
(D) A quicker alternative is to place the
KNOG Bouncer shackle around the rail/pole,
through a closed-loop section of your bike
frame and rear wheel. Then loop a KNOG
Ringmaster cable, around your front wheel,
bike frame, and onto your Bouncer shackle.
This method has high levels of security.
6