Product Information - Reef Skim Manual Del Usuario

instructions for installation and usE
important safety information - please read carefully
- Always isolate from the mains electricity before installing or carrying out any
maintenance to the REEF-Cam or REEF-Cam WiFi hub.
- Power to the REEF-Cam must be supplied through a Residual Current Device (RCD) with a
rated residual operating current not exceeding 30mA.
- Do not operate any appliance if it has a damaged cord or plug, if it is malfunctioning, or if it
has been dropped or damaged in any way.
- The REEF-Cam is designed to be used indoors and is not suitable for any outdoor
applications.
- Ensure that the REEF-Cam is securely and correctly installed before operating.
- Always leave a drip-loop in any cables to prevent water running down the cable and reaching
the power source and the WiFi hub (see below).
- Do not immerse the REEF-Cam WiFi hub in water at any time.
- Do not mount the REEF-Cam WiFi hub above the aquarium or in any position where it may
accidentally fall into the water.
- Do not install the REEF-Cam WiFi hub in any position where it can be splashed with
aquarium water.
- Dispose of this unit responsibly. Check with your local authority for disposal information.

product information

- Voltage: 220-240v 50Hz unless marked otherwise.
- Approx. power consumption: 5 watts.
Drip Loop
1