Reef Skim Manual Del Usuario página 7

nEtWorK connEction - sEtting up tHE Wifi connEction
1. Open the WiFi settings option on your
smartphone/tablet to search for your
REEF-Cam camera.
2. Once the REEF-Cam is found, it will be
displayed as something similar to "REEF-
Cam-00:11:7F:C9:93:06".
3. Select the
REEF-Cam and
enter the default
factory password
"12345678" and
then join/connect
to the REEF-Cam.
4. Open the REEF-
Cam App.
7. Enter the WiFi
network
password (your
home WiFi
network
password)
8. Press
please note: It
can take a few
moments to
search and find
the REEF-Cam.
5. The REEF-Cam
App will go to the
"Configuration -
Wireless" page.
6. Select the local
WiFi network
(WiFi SSID) you
will be connecting
to (in most cases,
your home WiFi
network).
please note: If a
WiFi network is NOT
found press the
refresh button and the
REEF-Cam App will
search again.
nEtWorK connEction – using
EtHErnEt cablE
1. Plug your ethernet cable into the
ethernet cable port (16) on the REEF-Cam
controller.
2. Open the REEF-
Cam App.
3. In the "Camera
List" page select
"Add Camera".
4. The REEF-Cam
App will now
search your WiFi
network to find
available cameras.
5. The REEF-Cam
will appear in the
list of available
cameras.
7. To confirm
press
please note: If you
enter an incorrect
password select the
camera again and
re-enter the correct
password.
4
Select the
camera you wish
to connect to.
6. Name the
camera as
required and
then enter the
factory password
"admin".