BLUETOOTHMODE
Bluetoothdevicecompatibility
Your WTR 3000 BT connects with all Bluetooth
devices that support the A2DP profile including
the most smartphones, laptops and tablets.
SelectingtheinputsourceBluetooth
1
Select the input source Bluetooth with
AL«.
– Display: »Bluetooth« and
»Searchin g «.
PairingBluetoothdevice
1
Activate on the Bluetooth device the Bluetooth
function.
2
Start on the Bluetooth device the search func-
tion.
– After a short period of time, your Grundig
WTR 3000 is displayed on the Bluetooth de-
vice.
3
Select the Grundig WTR 3000 on the Blue-
tooth device and connect it.
4
Once the Bluetooth device is connected to
your device, the WTR 3000 BT will display
»Bluetooth« and »Connected«.
Note:
Although the WTR 3000 BT can only stream
7
audio from one device at a time, it is capable
of being paired with up to eight devices.
ConnectingapairedBluetooth
Device
Notes:
You will only need to pair your Bluetooth de-
7
vice with the unit one time.
The next time your Bluetooth device and the
7
WTR 3000 BT are in range of each other,
and the Bluetooth feature is turned on, they
will automatically connect.
The WTR 3000 BT will only automatically
7
connect to the last Bluetooth Device it was con-
nected to.
---------------------------------------------------------------------------------------------------
If your paired device does not automatically
7
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
PlayAudiosignalfromyourBlue-
toothdevice
1
Start playback on the Bluetooth Device.
2
Adjust the volume using »–+«.
3
End playback on the Bluetooth Device.
Notes:
»Mode/
Various functions may also be controlled
7
from the WTR 3000 BT. Select Playback-
Pause using
again to resume playback; select previous ti-
tle by pressing »
ing »
Keep in mind that depending on the used
7
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
DisconnecttheBluetoothdevice
1
Switch off the Bluetooth function at the Blue-
tooth device or long press »OK/i« button.
– Display changes to: »Searchin g «.
ReconnectingtheBluetoothdevice
1
If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2
To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the Grundig WTR 3000.
Note:
In case of the registered Grundig WTR
7
3000 cannot connect to the Bluetooth de-
vice again, please remove the Grundig WTR
3000 from the Bluetooth device list, search
and connect again.
Automaticshutdown
If Bluetooth is selected as input source and no
Bluetooth device is connected, the WTR 3000 BT
switches automatically to Stand-by mode after 15
minutes.
»5+
II« , press
e
«, select next title by press-
r
«.
e
ENGLISH
»5+
II«
e
11