Assembly; Operation - Kärcher VC 4s Cordless Manual Del Usuario

Charger
WARNING
●
Only charge the appliance using the orig-
inal charger enclosed or with a charger
approved by KÄRCHER.
Use the following adapter:
Appliance type:1.198-281.0
1.198-291.0
(1)Charger
(2)Plug adapter (using the plug adapter ac-
cording to the actual situation)

Assembly

1. Insert the extension wand into the vacu-
um cleaner.
Illustration B
For removal, press the unlock button,
and unplug the extension wand.
2. Insert the extension wand into the floor
nozzle.
Illustration C
For removal, press the unlock button,
and unplug the floor nozzle.
Installing the storage dock
1. Insert the storage holder into the storage
base.
Illustration D
Storage holder
1
Storage base
2
24
6.195-095.0
Charger
1
2
Note
The appliance will be shut down automati-
cally if it is in danger of overheating. Ensure
that the brush roller is not blocked in any
way.
Note
 The appliance does not work during the
charging process.
 The charging time is approx. 3 - 4 hours.
 The appliance must be fully charged be-
fore first use.
You can charge the appliance in 2 different
ways:
 using the charging storage dock
 using the charging socket on device
Charging storage dock
1. Insert the connector of the charger into
the charging interface of the storage
dock.
Illustration E
2. Connect the power cable of charger to
the power supply.
3. Insert the appliance into the charging
storage dock.
Illustration F
The charging process starts automati-
cally.
4. When the charging process is complete,
unplug the power cable of the charger
from the power supply.
Additional charging socket on device
1. Open the cover of the charging inter-
face.
Illustration G
2. Insert the connector of the charger into
the charging interface.
3. Connect the power cable of the charger
to the power supply.
The charging process starts automati-
cally.
4. When the charging process is complete,
unplug the power cable of the charger
from the power supply.
English

Operation

Charging