Chauvin Arnoux C.A 6541 Manual De Instrucciones página 51

If a new is OBJ is selected, TEST is automatically set to the maximum memorised number.
At this stage it is possible to consult the entire memory with the
measurement values corresponding to the selected OBJ : TEST number are displayed on the main
display. It is possible to scroll down through them with the R-DAR-PI button.
I The V-TIME button is active and gives access to the date / time / V / OBJ-TEST number for each
result.
If the recording selected by the OBJ : TEST number corresponds to a time-controlled test, the R
(t) values can be accessed by pressing the R (t) button. The small display changes and indicates
st
min : sec (time of 1 sample) and the symbol
other samples with the
To exit from R (t) mode and return to the normal memory recall mode (OBJ : TEST), press R (t)
or R-DAR-PI again.
!
To exit the MR function, press the MR button once again or turn the selector switch.
flashes on the screen. You can scroll through the
.button.
L
M
51
L
and buttons, since the
M