Gearwrench 83169 Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly
Attaching the Side Handle
Position the side handle (A) on the holes in the right
of cabinet.
Attach handle (A) with 6 screws (AA) and tighten
with supplied hex key. Be careful not to over tighten.
Note: The holes in the cabinet are tapped and do not
require nuts.
Installing the Heavy Duty
Storage Hooks
Attach the nuts (CC) onto the hook (C) and then
insert the hooks in the holes as shown.
Be sure the hooks (C) are pointing upwards for
installation, then hand-tighten the nuts (CC).
Securely tighten the nuts (CC) with a 14mm wrench
(not included). Be careful not to over tighten.
Back
AA
A
Side
Installing the Cord Storage
Brackets
Attach the brackets (B) to the back of the cabinet
with two screws (BB) per bracket.
Orient the brackets (B) with one pointed up and
one pointed down so that the power outlet cord can be
wrapped around the brackets (B) for storage.
Installing the Shelf
Put the 4 shelf clips (E) into the slots on the interior
of the side cabinet as shown, installing two shelf clips (E)
on each side of the interior.
Be sure that all 4 shelf clips (E) are at the same level
before installing the shelf (D). Shelf can be installed at
desired level as long as the shelf clips are aligned
correctly.
4
B
D
E
BB

Publicidad

Tabla de contenido
loading

Tabla de contenido