Grizzly Tools BLSB 3030 Traducción Del Manual De Instrucciones Original página 98

GB
• The standard blower attachment (26)
allows for greater accuracy in blowing;
The flat blower attachment (27) facili-
tates blowing a broad stream of air.
• Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
• Before blowing, loosen leaves adher-
ing to the ground with a broom or
rake.
• The guide rollers at the end of the
tube make it easier to work on flat sur-
faces.
Suction operating mode:
In suction mode the device must
only be operated with the collec-
tion bag mounted.
• Put on the neck strap (28) and adjust
it to the optimal length.
• Always hold the device with both
hands during operation: with your left
hand at the handle (4), with the right
hand at the suction pipe handle (15).
• Make sure the volumes of leaf mate-
rial sucked in at one time are not too
large. This will avoid clogging of the
blower / suction tube and blockage of
the impeller wheel.
• For ground suction of leaves or leaf
residues, place the enclosed flat noz-
zle onto the end of the tube.
The ejection nozzle ensures ideal
transport of leaves into the leaf
bag. Additionally, it serves your
safety by preventing contact with
the fan during operation.
98
To reduce wear on the collec-
tion bag, do not drag it along the
ground while working.
If the device stops suddenly dur-
ing operation and does not pro-
duce any suction, then it is to be
switched off immediately. Make
sure that no material is wedged in
between the shredder impeller and
the casing. Carry out the work as
described in the chapter "Cleaning
and Maintenance". If the appliance
will not start, consult our Service
Centre.
Emptying the collection bag:
With full collection bag, the suction pump-
ing capacity decreases considerably and
the collection bag must be emptied when
the bag is full or interferes with the suction
capacity of the device.
Disconnect the spark plug terminal
before carrying out any work on
the equipment.
1. Turn off the device and wait until the
impeller has stopped.
2. Release the Velcro latch and remove
the collection bag (30) from the intake
pipe (29).
3. The carrying handle on the collection
bag makes it easier to transport the
bag.
4. Open the zip-fastener on the collec-
tion bag and empty it completely.
5. Mount the emptied collection bag
again.
Composting material does not be-
long with domestic waste!