Usage Methods - Qlima FFB 106 Instrucciones De Uso

• Be sure the table/floor you are placing this
• Installation only in a location which is pro-
• Convection air slots and rear ventilations
• Do not put any flammable items on top of
• This product can NOT be fixed to a wall of

USAGE METHODS

Assembly of the appliance
FFB 106 (Fig 1)
Parts List:
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
Safe Way to (re-) fill the Appliance
•
•
•
•
•
•
4
18
appliance can bear its weight
tected against cross aeration / air draft
of the appliance shall nog be covered /
obstructed
the appliance
roof
Fireplace body
Burner
Extinguish cover
Tempered glass
Screw (M16 x 12mm)
Screw cap
Silicone pads
Unpack the fireplace and accessories. Check the content for completeness
and any damage incurred in transit. Keep children away from the packing.
Only install or place on a solid floor of non-flammable material
Remove all packaging and information material before assembly
Assemble the fireplace base together and secure the glass onto the both
sides of the fireplace body with 6 screws.
Read warning sticker covering the burner, then remove the sticker
If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
Place the burner into the burning chamber of the fireplace body.
Before refilling the appliance after extinguished fire: make sure to WAIT FOR
AT LEAST 10 MINUTES.
NEVER refill with a burning fire! (Fig. 2)
Use a funnel for filling the appliance with bio ethanol.
NEVER fill the appliance to a level above the max level indicator!
(Fig 3: max level indicator)
Open the sliding cover of the fireplace, and fill the burner with the ethanol,
watch carefully and do not overfill or spill. (Fig. 4)
Remove any spilled ethanol immediately – and before lighting! Use an
appropriate absorbent tissue.
2x
1x
1x
2x
4x
4x
8x