EUROM Fly away 4 Manual De Instrucciones página 6

6
EN
1 - Insect killers Fly away 4 and Fly away 11
The electronic insect killers Fly away 4 and Fly away 11 attract small flies and flying biting
insects to their ultra-violet light. On their way to the lamp, the insects fly against an
electrically charged grid which destroys them quickly, hygienically and painlessly. They
then fall into a removable receptacle on the underside of the apparatus.
2 - Placement
A generally good place to hang is 1,5 to 3 metres above the floor. The ultra-violet light
attracts the flying insects, so don't hang it near other sources of light. The darkest place
gives the best result. Also make sure that there are no obstacles in the insects' flying route
towards the lamp. Hang the apparatus always at a distance of people or food, so that you
don't give them a chance to come near. Keep windows and doors closed as much as
possible. Insects hate draughts. Don't place the apparatus near an open window or door.
3 - Use
Remove all the packing materials. Make sure that all materials are removed.
Hang the device from its suspension ring or stand it on a safe, stable base. Never hang it
from its electrical lead! Make sure that the device is out of the reach of children.
The device will start to operate as soon as you plug it in. Plug it into a 220-240V wall
socket. The electrical mains to which you connect the device should have an earth-
leakage switch.
Before moving, cleaning or doing any maintenance on the device, always first make sure
that it is unplugged!
4 - Cleaning
Regularly clean the device and the high-voltage grid in particular. Not cleaning the grid
regularly can cause the device to malfunction.
Never touch the apparatus when in operation,
despite the harmless tension. Always unplug first!
Discharge static electricity prior to cleaning or
replacing bulb, by touching the grid with an
insulated screwdriver.
Dead insects can be removed from the grate and
the bulb with a small brush. Prick the brush for that
at several places through the plastic housing.
Soapsuds can also be used for cleaning. (most
household cleaning products are suitable). The
plastic housing can also be cleaned in this
manner. Make sure that the device is completely
dry before switching it on again!
Empty the removable receptacle on the underside
regularly. The easiest way is to hold the apparatus
in one hand and turn the receptacle a little with the
other hand till it is to remove. Then you can easily pull the receptacle out and dispose of
the dead insects. To replace the receptacle, just follow the above instructions in reverse
order.
Always check before inserting the plug into the wall socket that everything is clean and dry
and that all components are correctly positioned.
Make sure that all part are dry and well-installed again before you plug in again.
5 - A summary of the safety instructions

Before doing anything to the device (moving, cleaning, etc.) always make sure that it
is unplugged. Also be careful as regards the electrical supply! The mains to which you