Mitsubishi Electric PAR-U02MEDA Manual De Instrucciones página 14

Basic operations
▌ Automatic cooling/heating operation
<Auto (single set point)>
When the room temperature rises above the set temperature, cooling operation starts.
When the room temperature drops below the set temperature, heating operation starts.
<Auto (dual set points)>
When the room temperature rises above the cooling set temperature, cooling operation starts.
When the room temperature drops below the heating set temperature, heating operation starts.
1
Touch the 1 [ON/OFF] button.
2
Touch the 2 [Operation mode] button to display the "Auto" mode.
* If "Cool/Heat display" in the initial settings is set to "Show," the current operation mode "Cool" or "Heat" will be
displayed in the area labeled 2. Refer to the Installation Manual for details about initial settings.
▌ LOSSNAY unit (ventilator) operation
<When performing an interlocked operation of the LOSSNAY unit with the indoor unit>
Touch the 1 [ON/OFF] button to turn both the indoor unit and the LOSSNAY unit on.
<When operating the LOSSNAY unit individually>
1
Touch the button labeled 7 to
display the Indoor unit setting
screen.
* Indoor unit fan may operate even when the LOSSNAY unit is operated individually, depending on the models of the indoor unit
and the LOSSNAY unit.
Off
14
2
Touch the button labeled s to
change the fan speed of the
LOSSNAY unit.
7
Low High
s