Sonos ZonePlayer 90 Manual De Instrucciones página 31

Sonos ZonePlayer 90
• To change the settings for this device, select the Line-In tab from the Music
Library, select the source, and click Setup. Select the Line-In tab to make
changes.
A default (typical) line-in level is automatically assigned when you select a source
name, but if the volume sounds too low, you can select a higher line level for this
device. (You may experience sound distortion at higher volume levels if you set the
level too high.)
Line-in encoding settings
When you have line-in music sources attached to a ZonePlayer, line-in encoding
determines how the Sonos Multi-Room Music System will encode the data coming in
from these sources. For multi-room audio, we recommend using the Compressed
setting. For the highest quality sound, you can select Uncompressed encoding, but
this selection requires more network bandwidth than compressed audio. For TV or
DVD audio, we recommend using the Uncompressed setting.
To change the line-in encoding setting, select one of the following options:
• Using the Sonos Controller, select Settings→Advanced Settings→Line-In
Encoding.
• Using the Desktop Controller for Windows, select File→Preferences and then
click the Advanced tab.
• Using the Desktop Controller for Macintosh, select Sonos→Preferences and
then click the Advanced tab.
For additional information on connecting audio devices, you can go to our Web site
at http://faq.sonos.com/cables.
19