Sonos ZonePlayer 90 Manual De Instrucciones página 34

22
• Be sure that your cable/DSL modem is connected to the router's WAN
(Internet) port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the
ZonePlayer, and then connect another Ethernet cable from the ZonePlayer
directly to one of the LAN ports on your router.
• When you make a change to your network configuration, you may need to
power cycle the ZonePlayer by unplugging the power cord, and then plugging
it back in.
• If you are not using a router, you can visit our Web site at
http://faq.sonos.com/norouter for more information.
Sonos ZonePlayer 90