Package Contents - Moshi Spatia Guía Rápida De Inicio

QUICK START GUIDE

Package Contents

Power Adapter
Spatia AirPlay Speaker Power Cable
Indicator Lights and Controls
Indicator Light
front
Power Input
Before setting up Spatia, please make sure that:
1. Your Wi-Fi network is operational and your iOS device is connected to the network.
2. Your iOS device is AirPlay-capable (i.e. iPhone 4 or later, iPad, iPad mini, or iPod touch 4th generation or later).
QUICK START GUIDE
Quick Start Guide Safety Manual
Volume Indicator
Wi-Fi Direct AUX
AirPlay
back
Power / Mode Select Button
3.5mm AUX Port
Type-A USB Port
Volume Control Dial
1
Power
1
Plug in the power cable to
the power adapater as shown.
Safety and Warranty Sheet
2
Connect
a. Wired Setting
The fastest and most reliable way to connect Spatia to your network. You will need a standard USB to Lightning cable.
1
Make sure Spatia is turned on and in AirPlay Mode.
The indicator light should be ashing green.
2
Plug the power adapter cable to the
input jack located at the base of
Spatia's speaker stand.
There are three ways to connect Spatia to your network.
2
back
Connect the USB cable to the port located on
the back of the speaker. Then plug the
Lightning connector into your iOS device.
3
Turn on the speaker by pressing the power
button for 3 seconds. There will be a short
startup sound and the indicator light will ash
green letting you know you're ready to connect!
3 seconds
3
After a few seconds, a
"Share Wi-Fi Settings" dialog
box will pop up. Tap
Share Wi-Fi Settings?
"Allow" to share your Wi-Fi
Do you want to share your Wi-Fi
settings so this accessory can
settings. Once Spatia's green
connect to the Wi-Fi network?
indicator light stops ashing,
Ignore Allow
the process is complete.
Ignore Allow
Congratulations! You're now ready to start playing
music.