Kohler K-8761 Guia De Instalacion página 5

Valve Body
Inlet
Supply Hose or
Other Connector
(Not Provided)
Supply Stop
Outlet
5. Install the Supplies
NOTE: If the sink is not installed, install it at this time. Be sure to
follow all instructions packed with the sink.
Use supply hoses or other water supply connectors (not
provided) to connect the supply stop outlets to the valve body
inlets.
Tighten the supply hose nuts.
6. Installation Checkout
Ensure that both faucet handles are turned up to the closed
position.
Turn on the hot and cold water supplies. Check for leaks.
Remove the aerator by turning it counterclockwise.
Turn on the hot and cold faucet handles for one minute to flush
debris from the faucet.
Close the hot and cold faucet handles.
Reattach the aerator by turning it clockwise until hand tight.
Kohler Co. 5
Aerator
1015079-2-H