Technical Data - Bibby Scientific Stuart Overhead stirrer SS10 Instrucciones De Funcionamiento

Spares
The following spares and accessories are
available from your laboratory dealer:
Description
Fuse, T1A
Top case grommet
Chuck protective cover
For complete paddle, order rod plus head(s)
Paddle rod, 350mm
Paddle rod, 550mm
Small paddle head
Large paddle head
Large propeller head (2 blade)
Small propeller head (4 blade)
Anchor paddle head
Stand, General Purpose
(inc. base, rod & bosshead)
Stand, Heavy Duty
(inc. base, rod & bosshead)
For a comprehensive list of parts and a Service
Manual required by service engineers conducting
internal repairs, please contact the Technical
Service Department of Bibby Scientific Ltd.
quoting both the model and serial number.
Only spare parts supplied or specified by Bibby
Scientific Ltd. or its agents should be used.
Fitting of non-approved parts may affect the
performance and safety features designed into
the instrument.

Technical Data

Speed range 100 - 2000rpm
Litre capacity 15L
Max. viscosity 10,000mPas
Max. torque 15Ncm
Input power 50W
Chuck range 1.5 to 13mm
Hollow spindle -
Motor type DC permanent magnet
Dimensions
- Stirrer (wxdxh) 85 x 175 x 230mm
- Mounting bar 12.7 dia. x 240mm
Net weight 1.9Kg
Catalogue
Number
ESS20C1(S)
USS20C5
USS2056
SS10/5
SS10/6
SS10/10
SS10/11
SS10/12
SS10/13
SS10/14
SS10/1
SS10/2
SS10
100 - 2000rpm
25L
20,000mPas
27Ncm
80W
1.5 to 13mm
8.2mm dia.
DC permanent magnet
85 x 195 x 230mm
12.7 dia. x 240mm
2.1Kg
If in any doubt, please contact the Technical
Dept. of Bibby Scientific or the point of sale.
Bibby Scientific Ltd.
Beacon Road Stone
Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
e-mail: info@bibby-scientific.com
www.bibby-scientific.com
Warranty
Bibby Scientific Ltd warrants this instrument to
be free from defects in material and
workmanship, when used under normal
laboratory conditions, for a period of three (3)
years. In the event of a justified claim, Bibby
Scientific will replace any defective component
or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by unauthorized
personnel.
SS20
Low torque
100 - 2000rpm
25L
20,000mPas
27Ncm
SS30
High torque
50 - 500rpm
40L
50,000mPas
90Ncm
80W
1.5 to 13mm
8.2mm dia.
DC permanent magnet
85 x 195 x 230mm
12.7 dia. x 240mm
2.5Kg
3