Calypso Watches SMARTIME K8501 Manual Del Usuario página 4

and motion interface, click to select the date
to check the data corresponding. Click the
upper right icon on the APP to share the data
to QQ, QQ zone, wechat, wechat moments,
facebook, twitter,etc.
2.2.5 Message push
After the bracelet is bound to the app, the
corresponding notification permission in the
mobile phone system is enabled. Enter APP
notification settings in the APP to enable
more third-party applications.
2.2.6 Call notification:
Enable the call notification in the APP. When
the mobile phone receives one or more incom-
ing calls, the bracelet will receive one/multiple
incoming call notifications at the same time;
2.2.7 SMS notification:
Enable the SMS notification in the APP. When
the mobile phone receives one/multiple SMS
messages, the bracelet will receive one/multi-
ple SMS notifications at the same time;
2.2.8 Other application message notifica-
tions:
Enable the corresponding application mes-
sage notification, such as wechat, QQ, Face-
book, Twitter, etc. in the APP. When the mobile
phone receives one/multiple application mes-
sage notifications, the bracelet will receive one/
multiple corresponding message notifications
at the same time.
2.2.9 Do not disturb mode
After turn on do not disturb mode, smart watch
vibrate only find device and alarm stays work-
ing(message push disable);
2.2.10 Drinking water remind
Setting start time and end time, frequen-
cy(minutes), click repeat settings to select the
date(week), then click Drinking water remind
button to activate. Bracelet vibrates and drink-
ing water icon displays on the screen when the
drinking time is on.
2.2.11 Sedentary reminder
Set the start time, end time and sedentary time
interval (minutes), threshold (steps), click to en-
ter the Repeat to select the sedentary reminder
date (week). When the sedentary time is up,
the bracelet vibrates, showing sedentary icon.
2.2.12 Alarm reminder
Click the alarm reminder setting to add the
alarm time on the bracelet. When the alarm
time is up, the bracelet will pop up the alarm
icon and vibrates 5 times.
2.2.13 reminding mode
a) Bright screen: except for alarms clock,
sedentary and drinking water reminders, the
watch only displays bright screen as reminder;
b) Vibration: except for alarms clock, seden-
tary and drinking water reminders, the watch
only vibrates to remind;
c) Bright screen + vibration: Any reminders,
the watch will display bright screen + vibration
reminder;
2.2.14 Heart rate detection
Set the start time, end time and time interval
(minutes), chick the heart rate test and save.
2.2.15 Firmware upgrade
Detect whether the firmware version of the
bracelet is the latest version. It will prompt if
there is a new version and update to the latest
version.
2.2.16 Unbind
Bind the bracelet to APP; click unbinding
with bracelet on the device interface to un-
bind the device. Please forget the paired de-
vice in the phone settings of iPhone.
FAQ
*Do not expose this device to overcooling or
overheated conditions for a long time, other-
wise it will cause permanent damage.
*Why can't wear watch when taking a hot
bath?
As bath water temperature is high, it will gen-
erate mass steam which is in gaseous phase
and characterized by small molecule radius.
It is easy to penetrate through watch hous-
ing gap. When temperature lowers, it will be-
come liquid phase water drop, which is easy
to cause short circuit in the watch, resulting in
damaged circuit board and watch.
*The watch can't start up or charge
If the newly received watch can't start up,
it may be the reason that the battery is un-
der protection due to collision during watch
transportation. Plug in charging cable to acti-
vate the watch.
If your watch can't start up due to too low
battery or the watch has not been used for
a long time, please plug in USB cable and
charge for half an hour for activation.
4