Continuity Test; Specifikationer - LIMIT 110 Manual Del Usuario

Singel Pole Phase Test.
Singel pole test is appropriate to determine if a
line is live or not. Not show the specific value of
voltage.
1.Touch contact electrode (pos 8 fig 1). Don´t
wear insulated gloves or similar.
2. Connect test probes L2 to any contact point.
Buzzer and LED illuminate (pos 4 fig.1) indicate
phase.

Continuity Test

1. Make sure that there no voltage to object
being tested by doing a voltage test.
2. Connect probes L1 and L2 to the object
being testes. Buzzer sounds and LED Rx/Ω
illuminate when circuit is unbroken.
Rotary field indication (See fig 2)
Rotary field indication are made for identifiy
rotary direction of 3 phase motors.
1. Connect probe L1 to phase L1 and probe L2
to phase L2.
2. Touch contact electrode (pos 8 fig 1). Don´t
wear insulated gloves or similar.
3. Read voltage and rotary field direction R
(right rotary field) or L (left rotary field).
Replacing the battery.
If no buzzer sounds when shorting the test
probes or no LED illuminate battery must be
replaced.
1. Unscrew battery lid on botton of handle (Pos
12 fig 1) in direction of arrow.
2. Replace with 2 pcs 1,5 V type AAA battery. +
pole to be placed towards battery lid. Replace
the lid.
Svenska
Spänningsprovare Limit 110 /
112

Specifikationer

- 110 indikerar spänning 12, 24, 120, 230,
400, 690 Volt DC och AC.
- 112 mäter spänning 12...690 V DC och AC.
Upplösning 1 V. Noggrannhet + 3 % + 5
siffror.
- Kontinuitetstest 0...400 KΩ.
- Enpolig fastest 100...690 VAC.
- Fasföljdindikering 100...690 VAC. 50...60
Hz.