Advanced Playback Operations; Locating A Track (Multi-Ams/Auto Play/Memory Play); Advanced Recording Operations - Sony TC-RE340 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Advanced Recording Operations

Advanced Playback Operations

Locating a Track (Multi-AMS/
Auto Play/Memory Play)
You can locate the following/previous tracks within a
range of 30 tracks (Multi-AMS: Automatic Music
Sensor) or the beginning of a tape quickly (Auto Play).
You can even locate a specific point anywhere on a
tape (Memory Play).
RESET
MEMORY
DIRECTION MODE
POWER
RESET
Note
Check the direction indicator of the deck. When you locate a
track on the reverse side (when ª lights up), press the
button(s) in the parentheses.
To locate
The beginning of the
next or succeeding
tracks
(Multi-AMS)
The beginning of the
current track
(Multi-AMS)
The beginning of the
preceding tracks
(Multi-AMS)
The beginning of a tape
(Auto Play)
A particular point on a
tape (Memory Play)
8
GB
0
h/H )
SYNCHRO
FADER
ARL
AMS
PAUSE
REC MUTING
REC
DOLBY NR
BALANCE
AUTO CAL
OFF
B
B
EJECT
C
C
MPX
FILTER
L
R
MEMORY
Press
) (or 0) as many times as you
want during playback.
For example, to locate 2 tracks
ahead, press twice.
0 (or )) once during playback.
0 (or )) as many times as you
want during playback.
For example, to locate 2 tracks
behind, press three times.
MEMORY repeatedly until "M"
disappears in the display. Then
press 0 (or )) while holding
down · (or ª).
MEMORY repeatedly until "M"
appears in the display. Find the
point you want, then press RESET to
reset the tape counter and to
memorize the point.
To locate the memorized point and
start playback, press 0 (or ))
while holding down · (or ª).
(Press 0 or ) to stop at "00 00".)
Notes
• The Multi-AMS function may not work correctly if:
— the blank space between tracks is less than 4 seconds
long.
— there is a passage of low frequencies or very low
volume within a track.
— the signal strength of the left and right channels are
very different.
• Even if the DIRECTION MODE selector is set to Å or
a, the deck stops when the current side reaches the end
during Multi-AMS operation. (TC-RE340 only)
• The tape counters are reset to "00 00" when you turn off
the tape deck.
AUTO
REC LEVEL
5
4
6
3
7
2
8
1
9
0
10
PHONES

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Tc-ke240

Tabla de contenido