Basic Operation; Turning The Microphone On And Off; Setting The Base/Microphone Id; Adjusting The Volume And Squelch - Unlden Wham X4 UM525 Manual De Instrucciones

Basic Operation

Basic Operation

Turning the Microphone On and Off

Hold down POWER/VOLUME for about 2 seconds. If the
main radio is turned on, the channel that appears on the
microphone is the channel currently selected on the main
radio. Hold down POWER/VOLUME for about 2 seconds
again to turn off the microphone.

Setting the Base/Microphone ID

You must set the microphone ID to the same setting as
your radio's base ID so the microphone and radio can
communicate with each other. If you set the ID correctly,
you see similar information on both the radio's and
microphone's display.
1. To set the base or microphone ID briefly press MENU,
repeatedly press or
then press SELECT/SCRAM.
2. Repeatedly press or
then press SELECT/SCRAM.
3. Repeatedly press or
(BASE ID or HANDSET ID). Then press SELECT/SCRAM.
4. Repeatedly press or
(00-99 for BASE ID or 1-4 for HANDSET ID). Then
press SELECT/SCRAM.

Adjusting the Volume and Squelch

Briefly press POWER/VOLUME, then repeatedly press
to turn up the volume or
POWER/VOLUME to turn off volume mode.
To adjust the squelch, briefly press SQUELCH/BATTERY,
then repeatedly press to turn up the squelch or
turn it down. Briefly press PTT, 16/9/TRIPLE WATCH, or
DISTRESS to turn off squelch mode.

Checking the Battery Level

Hold down SQUELCH/BATTERY for about 2 seconds. A
number from 0-4 (0 is low, and 4 is full) appears showing
the battery level. If 0 appears, the radio does not have
enough battery power to operate. Briefly press any key to
turn off battery mode.
14
until LOCAL MENU appears,
until ID SETTING appears,
to select the ID you want to set
to select the ID you want
to turn it down. Briefly press
to
Basic Operation