Maintenance - GENERGY LIMITED1000I Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8. Maintenance:

The purpose of the maintenance plan is to ensure that the generator remains in
good working condition and that it reaches the maximum of its useful life.
DANGER: Before doing any maintenance, turn off the engine. If you need to
start the engine for any checking, first ensure that the area is well ventilated. The
exhaust gases contain carbon monoxide, which is poisonous to the user.
NOTE: Apply only GENERGY original parts or, if not available, components of
proven quality.
Maintenance plan:
SERVICE
Engine oil
Air filter
Spark plug
Engine valves*
Combustion chamber *
Fuel tank*
Fuel hose*
NOTE: If you use the generator in places with a lot of dust or with high
temperatures, does more frequent maintenance..
NOTE: All services marked with an asterisk (*) should be performed by
GENERGY Service or a qualified service. You must save the report of the work
done by the technical service.
NOTE: The failure of compliance with the maintenance plan will shorten the
life of the generator and will increase the possibilities of malfunctions or damages.
The warranty will not be applied in these cases. If one or more services planned
were not done, the warranty will not be applied, unless authorized by the
GENERGY Technical Service or a GENERGY authorized service.
STAGES OF MAINTENANCE
Check the oil level before each use. After 20 hours, the first oil change
should be made. Every 100 hours of use, do new oil changes.
Check and clean every 50 hours. At a maximum of 250 hours or
earlier if it is damaged, replace.
Clean and adjust the electrode every 50 hours. At a maximum of 250
hours or earlier if it is damaged, replace.
Adjust every 500 hours*
Clean every 500 hours*
Clean every 500 hours*
Replace every 2 years or earlier if it is damaged*
41

Publicidad

Tabla de contenido
loading

Tabla de contenido