Grizzly KSHS 710-500 Traducción Del Manual De Instrucciones Original página 125

Cortasetos telescópico/podadora de altura
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 185
Electrical safety:
Caution: This is how to avoid acci-
dents and injuries from an electric
shock:
The plug of the power tool must fit
into the socket. The plug must not
be modified in any way. Do not use
adapter plugs with power tools that
have a protective earth. Unmodified
plugs and matching sockets reduce
the risk of electric shock.
Avoid body contact with earthed
surfaces such as pipes, radiators,
cookers and refrigerators. There is
an increased risk of electric shock if
your body is earthed.
Do not expose power tools to rain
or wet conditions. The penetration of
water into a power tool increases the
risk of electric shock.
Never use the cable to carry or hang
the power tool or to pull the plug out
of the socket. Keep the cable away
from heat, oil, sharp edges and mo-
ving parts. Damaged or untidy cables
increase the risk of electric shock.
If you are working outdoors with a
power tool, only use extension ca-
bles that are suitable for outdoors.
Using an extension cable that is sui-
table for outdoors reduces the risk of
electric shock.
If operation of the power tool in a
damp environment is unavoidable,
please use a residual current cir-
cuitry. The use of a residual current
circuitry reduces the risk of an electric
shock.
If possible, connect the device only to
a socket with a residual current device
(RCD) with a tripping current of not
more than 30 mA.
If the device's mains power cable is
damaged, it must be replaced with a
specific power lead, which may be ob-
tained from the manufacturer or their
customer service representative.
Safety of persons:
Caution: This is how to avoid acci-
dents and injuries:
Pay attention! Be aware of what you
are doing and take the utmost care
when working with a power tool� Do
not use power tools if you are tired
or you are under the influence of
drugs, alcohol or medication. A mo-
ment of inattention whilst using the po-
wer tool can result in serious injuries.
Wear personal protective equip-
ment and safety goggles at all
times. Wearing personal protective
equipment such as a dust mask, non-
slip safety shoes, safety helmet or ear
protection, according to the type and
use of the power tool, reduces the risk
of injury.
Avoid starting the device uninten-
tionally. Ensure that the power tool
is switched off before you connect
it to the power supply, pick it up or
carry it and/or before you connect
the rechargeable battery.
Having your finger on the switch of
the power tool while carrying it, or ha-
ving the power tool switched on when
connecting it to the power supply can
cause accidents.
Remove adjustment tools or span-
ners away from the area before
switching on the power tool� A tool
or key located in a rotating piece of
equipment can lead to injuries.
GB
125

Publicidad

Tabla de contenido
loading

Tabla de contenido