Recording On A Recorded Md - Sony PMC-MD55 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Recording on a recorded MD

There are two ways of recording on a
recorded MD.
• To add to the previous recording. The
previous recording will remain.
• To record over the previous recording.
The previous recording will be erased.
Adding recording (the previous
recording will remain)
Insert a recorded MD, and start
recording (pages 6, 36 and 37).
Recording will be made from the last
recorded position.
If there is not enough space on the
MD to record
When recording a whole CD, "CD>MD
OK?" appears in the display (page 7).
When recording from the radio or a CD,
press DISPLAY to check the recording
remaining time on the MD.
38
GB
Recording
Recording over the previous
recording (the previous recording
will be erased)
To record over from the beginning of
the MD after erasing all tracks on the
MD
First, erase all tracks on an MD (page
42). You can use the MD the same as a
new one. Then, record on the MD as
usual.
To record over from a specific point
on the MD
1 Play the MD and press MD ^ to
pause play at the point you want to
start recording.
2 Press REC to make the player in
standby mode.
3 Play the sound source.
4 Press MD ^ to start recording.
Note
When recording over from a specific point
on the MD:
If the new recording is shorter than the
previous recording, a part of the previous
recording will remain after the recording.
As you repeat this type of recording, many
fragments of recording will remain on the
MD. We recommend that you erase all
tracks on the MD (page 42) if you no longer
need to keep the recording. Then, start
recording on the blank MD.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido