Troubleshooting - Sony PMC-MD55 Manual De Instrucciones

Troubleshooting

Symptom
There is no audio.
The picture of your TV becomes
unstable.
Noise is heard
The CD does not play./"No Disc"
lights in the display even when a
CD is in place.
The sound drops out.
An incompletely inserted MD
cannot be pulled out.
"Disc Error" lights in the display
and the player does not operate.
"– – –:– –" appears in the display
instead of the playing time or the
remaining time.
76 GB
Additional Information
Remedy
• Press OPERATE to turn on the player.
• Connect the mains lead to a wall outlet securely.
• Connect the power cord to POWER INPUT of
the player (page 61).
• Connect the audio connecting cord correctly
(page 61).
• Adjust the volume.
• Unplug the headphones from the 2 jack when
listening through speakers.
• Wait until "TOC Reading" disappears from the
display.
• Move the player away from the TV.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player. n Move the portable telephone, etc.,
away from the player.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The MD player's self-lock system has gripped
the MD. Insert the MD completely, then press
6 MD EJECT.
• Take the MD out and insert it again. If "Disc
Error" remains, replace the MD. Try erasing all
tracks on the MD (page 42).
• This player can display the time up to 159
minutes 59 seconds. If the time is longer than
this, it will be displayed as "– – –:– –".