A List; Switching Multi-Channel Audio And; Drc; Locating A Dab Service By Programme Type - Sony CDX-M770 Manual De Instrucciones

Automatic updating of the ensemble
list
When you perform the BTM function for the first
time, all the ensembles available in your area are
automatically stored. When you perform the
BTM function again, the contents of these lists
are updated in accordance with the conditions
described on page 23.
An ensemble is added to the respective list when
it is received during Automatic Tuning or
Manual Tuning but is unlisted.
An ensemble is also deleted from the respective
list when:
• you select an ensemble from the list, but it
cannot be received.
• you perform Automatic Tuning or Manual
Tuning to receive a listed ensemble, service, or
the component, but it cannot be received.
Switching multi-channel
audio and DRC
DAB can contain multi-channel audio. You can
select main or sub-channel for reception. Also, if
you turn on the DRC (Dynamic Range Control)
function, the dynamic range on the service which
supports DRC can automatically be extended.
The following items can be set:
• BLGL — to select the channel from either
"Main" (main-channel) or "Sub" (sub-
channel).
• DRC — to turn on or off the function.
1
While listening to a DAB programme,
press (MENU).
2
Press M or m repeatedly until "DRC" or
"BLGL" appears.
3
Press either side of (SEEK) to select
the desired setting (Example: "on" or
"off").
4
Press (ENTER).
Note
"BLGL" appears in the menu only when the unit is
receiving a multi-channel programme.
Locating a DAB service by
programme type (PTY)
You can use the PTY (Programme type selection)
function to tune in the programme you want.
1
While listening to a DAB programme,
press (DSPL/PTY).
2
Press M or m repeatedly to select the
programme type.
The programme types appear in the order
shown on page 20.
3
Press (ENTER).
Searching for a service of the selected
programme type begins automatically.
25