Recording from
the radio or a CD
You can record from the radio or a CD
to an MD using the REC button. You can
start or stop recording at any point you
want. You can also pause recording.
Notes
•
After you
stop
recording,
do not disconnect the
AC power cord or
move the player
while "TOC EDIT" is
flashing in the
display. If you do so,
recording may not be
done properly.
• While recording from
radio, you cannot
change the station.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To add track marks
during recording, press
REC where you want to
add track marks.
• To record over the
previous recording, see
page 28.
• To add track marks
after recording, see
"Dividing recorded
tracks" on page 34.
26
GB
Recording
REC
CD ^
Recording from the radio
When receiving conditions are good, track marks are
added on the MD automatically:
– when there is no sound input during recording for
more than 2 seconds.
– when a soft sound like pianissimo continues during
recording.
– when you pause recording.
If unnecessary track marks are added, erase them after
recording (see "Combining recorded tracks" on page
36).
1
Tune in the station you want to record from.
2
Insert a recordable MD.
3
Press REC (r on the remote).
Recording does not start (recording standby
mode).
4
Press MD ^ (MD ( or MD P on the remote).
Recording will be made from the last recorded
position.
To stop recording
Press MD p.
MD ^
Jog dial
BAND
CD p