70mai MIDRIVET01 Manual Del Usuario página 18

4. Fix the tires to the wheel hubs and inflate the
tires to the standard pressure.
Note:
Turn on the receiver before installing the sensors.
While inflating the tires, the receiver will display the tire
pressure and temperature based on the data it receives
from the sensors. If the receiver does not display the
tire pressure and temperature, do not install the tires.
Contact the After-sales Service Department for
assistance.
5. Check the tire nozzles for leakage. (If there
is any leakage, adjust the nozzle angle or
clean the nozzle hole on the wheel hub.)
6. Calibrate the tires through dynamic balancing.
1６