Prerequisites For Correct Measuring Results; Automatic User Recognition - Medisana BS 430 CONNECT Instrucciones De Manejo

GB Instruction Manual
A) Simple weight measurements with the „Step-On" function
Simply stand on the scales bare-
1
foot (without socks or similar).
B) Setting the personal data in the scales
The scales can store the data (gender, athlete mode, height, age) for 8 people with up to 30 memory locations each.
The values preset in the scales are: Male, 165 cm, 30 years old, kg.
Press your foot on the middle of the surface of the scales.
1
2 2
Press the SET button until the
1
disk space blinks in the display.
Select the desired disk space
2
using the ▲/▼-buttons.

Prerequisites for correct measuring results

Reliable measurements can only be achieved under certain prerequisites:
• Always weigh yourself under the same conditions. • Always weigh yourself at the same time of day.
• Stand up straight and stand still. • Weigh yourself preferably in the morning, after showering or bathing, and with dry feet.
It is possible to obtain a reliable indication of body weight development from the results if measurements are carried out consistently.
Change the unit of weight
Shortly press your foot on the middle of the scale surface. „0.0" appears in the display. You now may select the weight
units (kg - lb - st) with the shift key (on underside) for setting the weight unit.

Automatic user recognition

Automatic user recognition based on last measurement:
Stand on the scales barefoot. Your user data (memory location) is selected automatically.
If your user data is not selected correctly , select the number (P1 to P8) by pressing " ▲ " or " ▼ " and confirm with
•
"SET".
• Error message "P1P2" or other combinations of memory locations = The scale recognizes users already saved
based on their weight. In this case, two users have a similar weight. To select the correct user press the UP key for
the left value (example "P1") and the DOWN key for the right value (example "P2").
6
BS 430 CONNECT
BS 440 CONNECT
Your weight is shown.
2
3
Press the SET button to save the
3
selection. Continue accordingly
to make the settings for gender,
athletic condition, height and
age.
After you have set your personal
4
data, the display shows "0.0".
To finish the scale settings,
5
simply stand barefoot on the
scales.
The display shows the following
6
measurements:
• Weight
• Proportion body fat
• Proportion body water
• Proportion muscle mass
• Bone mass
• BMR (calory requirement)
• BMI