Replacing the UV Black Light (Fig. 4)
The brightness of the florescent UV black light
diminishes over time. Replace it every season to
maintain optimal bug zapping efficacy.
Fig. 4
UV black light
Grate
Collection
tray
1. Unplug the device and un-hang the bug
zapper. Allow it to sit for 30 seconds for the
electrical charge to dissipate.
2. Remove the collection tray (Fig. 3).
3. Unscrew both machine screws securing the
grate.
4. Remove the grate and the rubber tube
guard.
5. Wearing gloves, gently pull the black light
out of the housing.
6. Wearing gloves, insert the replacement
7. Place the grate and the rubber tube guard
8. Return the collection tray back into the
9. Plug it in to test it out.
Housing
Storage + Maintenance
• Store the bug zapper indoors and out of the
• Do not clean the bug zapper with harsh
Service + Support
If your Sun Joe
Zapper requires service or maintenance, please
Rubber
tube guard
call Snow Joe
at 1-866-SNOWJOE (1-866-766-9563) for
Machine
assistance.
screws
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you will need
to provide the model and serial numbers, which
can be found on the registration card. Copy
these numbers into the space provided below.
6
black light making sure that the four pins
are properly seated into the socket.
NOTE: Replace the black light only with an
official Sun Joe
replacement UV black light
®
(model BZ18W-BLB).
on the end of the new black light. Secure
them into position with the two machine
screws.
bottom of the housing. Rotate clockwise to
lock it in place.
NOTE: If the bug zapper fails to light up
after replacing the UV black light, unplug
device and follow the instructions above to
ensure that it is correctly installed.
reach of children.
chemicals, solvents (such as acetone), or
strong cleaning agents.
SJ-BZ18W Electric Bug
®
+ Sun Joe
®
Record the following numbers from the registration card
of your new product:
Model #:
S J - B Z 1 8 W
Serial #:
customer service
®