Omnideck Mounting - Bradley OmniDeck 3000 Serie Manual De Instrucciones

LD-3010 Series
2 OmniDeck™ Mounting
Terreon SL-TO1 oval bowl is shown.
All other bowls are similar.
Carrier Sleeve Mounting
Secure the carrier
B
sleeves to the bottom
of the lav deck at the
desired locations with
silicone caulk/sealant .
Carrier
Sleeve
With help, slide the lav deck
onto the carrier, aligning the
C
access holes in the carrier
sleeves with the carrier arm
leveling screws and locking
device . Adjust the carrier
sleeves as needed .
Bracket Mounting
Apply PC-Concrete
A
repair and anchoring epoxy (or
equal) to the top of the mounting
strips (left-hand bracket shown) .
10
Install the concealed
A
arm lav carrier
(supplied by installer)
per manufacturer's
instructions .
Leveling
Screws
Locking
Device
FinishedFloor
injectable
®
2/27/2020
Table A
Carrier Arm Spacing
Basin Model #
SL-TO1
SL-TR1
HS-TO1
HS-TS1
HS-TR1
Bottom View of Lav Deck
with Carrier Sleeves
Leveling Screw
Access Hole
Locking Device
Access Hole
Leveling Screw
Access Hole
SL-TR1 rectangular bowl is shown, all other
bowls are similar.
Backing substrate required for structural
integrity if brackets aren't secured to a stud.
Bradley • 215-1219 Rev. Q: ECO 19-08-037B
(min.)
22" (559)
23" (584)
27½" (699)
19" (483)
27½" (699)
6" (152)
6" (152)
See Table A
Position the access panels
B
snug to the underside of the
basin . Secure the access
panels to the wall with four
#10 fasteners (supplied by
installer) .
Installation
Carrier
Sleeve
9"
(229)