Blauer. H.T. BRAT Manual De Instrucciones página 9

5
Warning:
If you are not sure that you properly replaced the visor, do not use your helmet. The visor could suddenly and without
warning become detached from the helmet while riding, causing you to lose control of your motorcycle, resulting in an accident,
personal injury, or death. Contact your retailer for any assistance or advice. Do not ride with an open visor and do not try to open
or adjust the visor while riding.
Tinted or dark visors should never be used at night or under poor visibility conditions as they reduce your ability to see.
If your visor no longer provides you with clear visibility after a period of service, you must immediately replace it. Never ride if your
visor is scratched, dirty, foggy or with your vision obscurred in any way. Always ride with perfect visibility.
Comfort liner removal.
11
How to remove your interior for cleaning or replacement:
- Release each cheekpad from the helmet by pulling inward, freeing it from the attachment system.
- Flip your helmet over and pull on the cheekpad. Note how the cheekpad plate slips between the helmet shell and EPS
liner for reassembly.
- Remove your comfort liner by releasing it from the snap system on the back of the helmet. Then remove the comfort liner
attachment point, taking note of how the comfort liner attachment slips into place between the shell and EPS liner.
Remove the side-liner pieces by pulling inward, freeing them from their attachment points.
1
WARNING: The interior padding is critical to maintain the correct fit of the helmet on your head. If you have any doubt whatsoever
regarding the removal or replacement of the interior padding, do not use your helmet. Contact your retailer for assistance or
advice. Never use your helmet with any part of the interior padding removed. The helmet will not protect you in an accident.
7
2
6
3