Installing The Zero Base Baby Carrier On The Platform; Detaching The Zero Base Baby Carrier From The Platform; Guarantee Information - Be Cool Zero Base Manual De Instrucciones

REMOVING THE PLATFORM
1.e
Loosen the platform by turning the handle on the front of the
platform (5).
1.f
Release the ISOfix fasteners by pulling the buttons (4), the
button indicator will turn red.
1.g
Remove the platform.
INSTALLING THE ZERO BASE BABY CARRIER ON
THE PLATFORM
2.a Drop the baby carrier so it locks into place with the Pro-Fix
fasteners (9).
2.b
Check that both sides are fastened into place, the indicator
should be green.
2.c Set the ZERO BASE handle to the auto position, the car
symbol should be complete.
2.d Turn the handle (5) so that the whole ensemble is secure
against the backrest of the vehicle
DETACHING THE ZERO BASE BABY CARRIER
FROM THE PLATFORM
3.a Pull the buttons on both sides of the handle of the baby
carrier to release the Pro-fix anchors and lift the baby carrier
off the base.
IM 2009,01 ZERO BASE ins.indd 17

GUARANTEE INFORMATION

This article is guaranteed in accordance with R.D. 1/2007 of 16th
November. Keep your receipt as proof of purchase, you need to
show it at the store where you purchased the product to prove
validity in the event of any type of claim. This guarantee does not
cover any faults or breakages caused by misuse of the article or
by not following the safety and maintenance information listed in
the instructions and on the care labels.
EN
17
19/6/18 19:13