Let's Get Started - TCL W5WR1 Manual Del Usuario

Let's get started!

Step 1:
Testing
Before you install your AC, let's test it to make sure it made it safely to your home and your outlet
has the proper power level to run your AC. Place it on a flat surface, only plug it directly into a wall
outlet (never use a power strip or other device), and turn it on. Next, use the Mode button on your
control panel to change the AC to Cool Mode and press the down arrow to set the temperature to
the lowest setting. After 3 minutes, the AC should be blowing cool air. If so, please continue to the
next step. If not, see detailed troubleshooting tips at https://support.tcl.com.
Step 2:
Installation
A few quick notes before installing:
• This unit is made to fit inside a standard double-hung window.
• Check the size of your window before installing.
Use the (4) included 3/8" screws to fasten the top mounting rail to the unit.
1.
Fasten the accordion styled window panel expander pieces to the unit. They are marked
2.
"Right" and "Left". Pull the leading edge of them to its maximum width. Then slide the panel
2a.
expanders into the grooved notches (slide downward) on the sides of the unit, and make sure
they are inserted into the metal rails tightly.
2a.
Top Mounting Rail
Top Mounting Rail
2b.
2b.
Window
Window
Frame
Frame
(4) 3/8" Screws
(4) 3/8" Screws
2c.
Top Mounting Rail
2c.
Top Mounting Rail
Filler panel
Filler panel
Top Mounting Rail
Top Mounting Rail
1/4"
1/4"
8
Filler panel
Bottom Rail
Filler panel
Bottom Rail