Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
Unit
Motor voltage ..............................10.8 V
Rated speed ............................ 1300 min
Protection class ..................................... III
Protection category............................IPX1
Grass-trimming blade
Cutting width ............................ 100 mm
Shrub-trimming blade
Cutting length .......................... 160 mm
Distance between teeth... approx. 8 mm
Weight (incl. accessories) ..approx 0.95 kg
For grass shear function:
Sound pressure level
(L
) ..................... 79.1 dB(A), K
pA
Sound power level (L
guaranteed .............................. 89 dB(A)
measured ............86,5 dB(A); K
Vibration (a
)
h
at handle .............2.36 m/s
For hedge trimmer function:
Sound pressure level
(L
) ..................... 72.7 dB(A), K
pA
Sound power level (L
guaranteed .............................. 89 dB(A)
measured ............84.4 dB(A); K
Vibration (a
)
h
at handle ...........4.046 m/s
Battery (Li-Ion) .................. SI-LA-108-3E
Nominal voltage ..........10.8 V
Loading time........................ approx. 3 h
Charger ...................BI12TA-136080-AdV
Voltage input 100-240 V~; 50/60 Hz; 0.5 A
Voltage output.............................13.6 V
Recharging current ....................... 800 mA
Protection class .................................
Protection category............................ IP20
=3 dB
pA
)
WA
=3 dB
WA
, K=1.5 m/s
2
=3 dB
pA
)
WA
=3 dB
WA
2
, K=1.5 m/s
2.2 Ah
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement.
The stated vibration emission value was
-1
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.Safe-
ty precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
2
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety Instructions
This unit can cause serious in-
jury if not used correctly. Before
2
using the unit, carefully read
through the instruction manual
and familiarise yourself with all
of its controls.
Symbols
Symbols on the unit
II
Attention!
Before using for the first time, care-
fully read through the user manual.
GB
73
Publicidad
Capítulos
Tabla de contenido
