Install The Wheels; How To Control Your Dehumidifier - TCL W20D91 Manual Del Usuario

1a.
Step 3:

Install the Wheels

Tilt the unit no more than 45° and forcibly insert the wheels. Make sure the plate of the wheels
is flush against the bottom of the unit. If the appliance has pre-installed wheels, this step can
be skipped.

How to Control Your Dehumidifier

All the basics you need to know!
When first operating the dehumidifier, run it in Continuous mode for 24 hours.
1.
Press the Power button once to manually turn the unit on. Press the Power button once more
2.
to turn the unit off.
Humidity Selection – Press the "down" or "up" buttons to choose the desired relative
3.
humidity. Once the preferred humidity is selected, the display will show the actual room %
humidity. Each press of the same button will change the desired room humidity by 5%. The
room humidity is selectable from 35% - 80%, or continuous. The until will cycle on and off
to maintain the humidity level chosen on the digital display. If you want the dehumidifier
to operate continuously regardless of the room humidity, press the mode button until you
see "CO" on the digital display. This will enable continuous operation and the "Continuous"
indicator will light up on the control panel.
Fan Speed – press the Fan Speed button to cycle through the different fan speeds (High,
4.
Low). The fan speed can be visually distinguished by the fan speed indicators on the
control panel.
1b.
Latches
1c.
Wheels and other
accessories
7
1d.