Gardena Master Instrucciones De Empleo página 18

Active (manual) watering v (Fig. I):
1 Manual watering
Setting schedules v (Fig. H):
1 Set schedule | 2 Schedule 1
Configure and save up to 6 different watering
schedules by setting the start time, duration and
weekdays for each one. Schedules can be acti-
vated or deactivated by pressing on / off (see fig. H).
Default display v (Fig. J):
1 Idle screen | 2 Programs
Seasonal watering duration v (Fig. K):
1 Menu: Seasonal Run Time | 2 Regular Run Time |
3 Reduce Watering
You can reduce the durations set for all schedules
at once in 10% increments, from 100% down
to 10%. This saves you having to change each
of the 6 schedules individually.
Tip: Less watering is required in the spring and
autumn than in the height of summer. Simply set
the maximum watering duration for high summer
as the default. Then reduce the watering duration
for all schedules at once in convenient 10 % incre-
ments when there is less need for watering.
Note: When you change the percentage, the dura-
tion is adjusted within the schedules and the
"cloud" symbol appears. If the duration is not
altered (= 100 %), the "sun" symbol is displayed.
20
1892-20.960.04.indb 20
Rain pause v (Fig. L):
1 Menu: Rain pause | 2 Pause / 3 days
Pauses all watering operations without changing
the set schedules. You can select any number of
days between 1 and 9. At the end of the pause,
all schedules are reactivated.
Deleting a schedule v (Fig. M):
1 Menu: Delete schedule | 2 Delete schedule 1
Soil Moisture Sensor v (Fig. D and N):
1 Menu: Soil Moisture Sensor
Once the soil is sufficiently moist, a watering opera-
tion is interrupted or a schedule is disabled so that
it cannot be activated. This does not affect active
(manual) watering.
Soil Moisture Sensor, Art. 1867
(optionally available)
1 Connect soil moisture sensor
Once a soil moisture sensor has been
connected, the next step is to specify the future
switching point in the "Soil moisture sensor" menu.
This is the soil moisture level at or above which
watering is not to be carried out (see GARDENA
Soil Moisture Sensor Operating Instructions).
There are 5 levels to choose from.
– During normal operation, the currently measured
level is displayed constantly.
– The switching point as of which the sensor sig-
nals that the soil is moist – thereby preventing
watering – is selected via the number of levels.
18.12.20 12:25