Use Instruction - Vaporesso TARGET PM80 Manual Del Usuario

USE INSTRUCTION

1. Install the Coil
Take out the coil from the package of the TARGET
PM80, and insert the coil firmly into the POD.
3. Fill the E-liquid
- Uncover the silicone plug at the bottom of the
POD;
- Gently insert the e-liquid filling bottle tip to the
filling slot and press down to squeeze the e-liquid
through the slot.
- Please wait for 5 minutes for the e-liquid to soak
into the coil.
4. Power on the Device
Click the power button 5 times in 2 seconds to power on or power off the device.
5. Power Adjustment
TARGET PM80 is using the powerful GTX coil platform, and the suggested power need to be noticed
before start vaping.
GTX MESH Coils
Suggested Power
2 English
2. Replace the Coil
1) Please confirm the POD is empty before
coil replacing.
2) Pull out the used coil
3) Install a new coil firmly
Incorrect Installation
GTX 0.2Ω MESH
45-60W
Correct Installation
GTX 0.3Ω MESH
32-45W