Important Safety Instructions; Safety Alert Symbol; Heater Characteristics / Specifications - BriskHeat Cloth Heating Jackets Instrucciones De Instalación

IMPORTANT SAFETY INSTRUCTIONS

SAFETY ALERT SYMBOL

The symbol above is used to call your attention to instructions
concerning your personal safety. It points out important safety
precautions. It means "ATTENTION! Become Alert! Your
Personal Safety is involved!" Read the message that follows
and be alert to the possibility of personal injury or death.
DANGER
A person who has not read and understood all operating
Instructions is not qualified to operate this product.
DANGER

Do not immerse heater in liquid.

Keep volatile or combustible material away from
heater when in use.

Use heater only in approved locations

Keep sharp metal objects away from heater.

Never handle the heater while it is in operation.

Always disconnect the heater from the power source
and allow to cool prior to removing from the surface.

Do not use in the presence of flammable or
combustible materials, fire or explosion may result.
The heater contains components which may ignite
such materials.

Do not modify this product. Modification will void
warranty.
Failure to observe these warnings may result in electric
shock, risk of fire, and personal injury.
WARNING
End-User Must Comply to the Following:

Only qualified personnel are allowed to connect the
electrical wiring.

Disconnect all supply power at the source before
making any heating cable power input connections.

All electrical wiring must follow local electrical codes
and highly recommend following NEC Article 427.

The person who performs the final installation / wiring
must be qualified for this work.

The end-user is responsible for providing a suitable
disconnecting device.

The end-user is responsible for providing suitable
electrical protection device. It is highly recommended
that a ground fault circuit breaker be used.
Failure to observe these warnings may result in personal
injury or damage to the product and/or property.
®
© BriskHeat Corporation. All rights reserved.
Cloth Heating Jackets
DANGER
Immediate hazards which WILL result in severe personal injury
or death.
WARNING
Hazards or unsafe practices that COULD result in severe
personal injury or death.
CAUTION
Hazards or unsafe practices that COULD result in minor personal
injury or property damage.
OPERATION
Your Cloth Heating Jacket is designed to provide a long and
efficient service life. Overheating, contamination and misuse
will greatly reduce the life of the heater. Your heater should
only be used in dry, non-hazardous area. Only use the heater
on the surface it is designed to heat.
CAUTION

Never operate the heater without a temperature
control device. Failure to use such a device may result
in process damage or heater failure.

Inspect heater before use (see page 10).

Never operate the heater without it being placed onto
the surface.

Never expose the heater to temperatures above the
cloth's rated exposure temperature.

Fluid should not be allowed to come in contact with
the heater.

Never lift or pull the heater by its power cord or lead
wire.

Never use fasteners, other than those provided with
the heater, as a method to tighten the shell of the
heater. Only the liner of the heater is designed to fit
snugly to the surface. The tightness of the heater's
shell will vary with shape and insulation thickness.

Never cut, punch holes in or otherwise modify heater.

Do not use tools such as pliers or vice grips to pull or
tug heater.
Failure to observe these warnings may result in personal
injury or damage to the heater.
3

HEATER CHARACTERISTICS / SPECIFICATIONS


Maximum exposure temperature (By inner liner material):
○ Fiberglass 900°F (482°C)
○ Silicone 482°F (250°C)
®
○ Samox 1100°F (593°C)
○ Brisk Clean 600°F (315°C)
○ PTFE 500°F (260°C)

Maximum humidity: 95%

Ingress protection: IP5X
®
© BriskHeat Corporation. All rights reserved.
Cloth Heating Jackets
4