Product Overview - Receiver - LEGRAND C2G30013 Manual De Instrucciones

HDMI® HDBaseT + 3.5mm, USB-A to B, and RS232 over Cat Extender
Box Transmitter to Box Receiver - 4K 60Hz
Product Overview
Front Panel
2
1
F P D
RONT ANEL ESCRIPTION
On: Power is applied to the device.
1 Power LED
Off: No power is applied to the device.
Blinking: The device is working properly.
2 Status LED
Off: The device is not working properly.
On: HDCP protected content is being transmitted.
3 HDCP LED Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
On: HDBT link is normal.
4 Link LED
Off/Blinking: No HDBT link or link error.
Receiver
3 4
Rear Panel
5 6
R P D
EAR ANEL ESCRIPTION
Connect to the provided DC 12V power adapter. With PoH
5 DC 12V
function, the receiver can be powered by the transmitter.
6 HDBT IN Connect to HDBT OUT port of transmitter
7 RS232 For RS232 pass-through.
8 HDMI OUT Connect to an HDMI display using an HDMI cable.
Unbalanced stereo audio output.
•
9 AUDIO OUT
•
Connect to USB devices such as keyboard, mouse, USB
10 4x USB-A
camera, etc.
3
Receiver
8 10
7 9
PASS THROUGH: For audio pass-through from
Audio IN port on the transmitter to this port.
DE-EMBED: For audio de-embedding from the
HDMI output.
(us)
(us)