V-TAC VT-5016–5 Manual De Instrucciones página 6

Step 1. Take the lower
base pole (15)into the
round base hole(16),put
the heavy (17)inside the
round base(16) with the
lower base pole(15),Tight-
en the heavy(17) and the
round base(16) with
screw(18).
Replace the pole clamp
(14) and at the same time
raise the chrome adjust-
able pole (13) then tighten
the clamp (14).
Attach the fan assembly on
top of the pole and tighten
the pole retaining screw
(12).
Note: the adjustable pole
(13) can sometimes slip
inside the lower base pole
FIG 1
(15) during transit.
Guard
locating pins
Step 2. Note the Rear
Guard locating pins on
the Motor Housing (7).
FIG 5
Step 3. Place the rear
guard (5) over the
pins on the motor
housing (7) and
replace the Rear
Guard Central Fixing
(4) nut by screwing it
back clockwise.
Note: the carry
handle is at the top:
FIG 6
ENGLISH