CLEANING
• All removable parts (A, B, C, D, G, L and M) are dishwasher-safe. the juice
collector (E) must be cleaned straight after use in warm water and
washing-up liquid.
• this appliance is easier to clean immediately after use.
• Do not use abrasive sponge, acetone, alcohol (white spirit), etc. to clean
the appliance.
• the sieve must be handled with care. Avoid any mishandling that may
affect the performance of the appliance. Replace your sieve at the first sign
of wear or damage.
• Clean the motor unit with a damp cloth. Dry carefully.
• Never immerse the motor unit under running water.
• After use, the juice jug (M) can be stored in the pulp collector.
WHAt to Do IF YoUr APPLIANCe Does Not WorK?
PROBLEMS
The appliance does not work.
The appliance is giving off a smell
or is very hot to touch, is making
an abnormal noise or smoking.
The flow of juice decreases.
For any other problem or fault, please contact your approved Service centre.
CAUSES
The plug is not inserted correctly;
the control switch (I) is neither on
"1" nor on "2".
The cover (C) is not properly
secured.
the sieve (D) is not properly fitted.
The quantity of fruit or vegetables
being processed is too great.
The sieve (D) is blocked.
7
SOLUTIONS
Plug the appliance into a socket with the
correct voltage. turn the control switch
to speed "1" or "2".
Check that the cover (C) is properly
secured by the safety clamp (H) and
positioned correctly in the grooves.
Check that the sieve (D) is fitted
properly onto the drive shaft (J).
Allow the appliance to cool down
and reduce the amount of fruit or
vegetables being processed.
switch off the appliance, clean the
feed tube (B) and the sieve (D).