Moulinex STORE INN SUCCESSOR 3L FP323821 Manual De Instrucciones página 17

(b2)
• Fit the lid onto the bowl
It is essential to lock the bowl onto the motor drive
• Unlock the lid by turning it clockwise to release the bowl handle. You will then be able to lift and remove it.
• Unlock the bowl by turning it clockwise.
• Only now will you be able lift and remove the bowl from the motor drive.
3 : Mixing/blending/chopping/kneading
ACCESSORIES USED:
(b)
• Bowl assembly .
(c)
• Spindle .
(d)
• Multifunction blade
FITTING THE ACCESSORIES:
(b3)
• Place the bowl onto the motor drive
• Slide the multifunction blade
• Place the ingredients in the bowl.
(b2)
• Place the lid and lock it on the bowl
• To remove the bowl-lid assembly: unlock the lid then unlock the bowl.
KNEADING/MIXING
• Turn the speed selector
You can knead up to:
- 1 kg of heavy dough, such as white bread dough, shortcrust pastry in 60 sec.
- 800g of special bread dough, such as rye bread, wholemeal bread, wholegrain bread, etc. in 60 sec.
You can mix up to:
- 1.2 kg of light cake mixture such as biscuit dough, pound cake, sponge cake, etc. in approximately 1 min
30 sec to 3 min.
You can also mix up to 1 litre of pancake or waffle batter in 1 min to 1 min 30 sec.
CHOPPING
• Turn the speed selector
You can chop up to 600 g of food such as:
- Raw or cooked meat (boned, trimmed and diced).
- Raw or cooked fish (skinned and filleted).
- Hard foods: cheese, dried fruit, some vegetables (carrots, celery, etc.).
- Soft foods: some vegetables (onions, spinach, etc.).
BLENDER
• Turn the speed selector
You can blend up to 1 litre of soup or stewed fruit in 45 sec.
ACCESSORIES USED:
(b)
• Bowl assembly .
(c)
• Spindle .
(f)
• Cartridge of choice
(g)
• Cartridge support .
FITTING THE ACCESSORIES:
(b3)
• Place the bowl on the motor drive
• Insert the selected cartridge
(c)
axle as far as it will go through the cartridge
position it on the motor drive
(b2)
• Fit the lid and lock it on the bowl
• To remove the bowl-lid assembly: unlock the lid and then unlock the bowl.
(b3)
. Lock the lid by pushing it to the right in the bowl handle.
2 : Removing the chopping bowl and lid
.
(a)
and lock it in place.
(d)
onto the spindle
(b3)
.
(a3)
to position 2 to start it up.
(a3)
to position 2 to start, or for better control of chopping, use the pulse position.
(a3)
to position 2 to start.
(depending on model).
(a)
and lock it.
(f)
into the cartridge support
(a1)
.
(b3)
(a)
before locking the lid
(c)
, and position the entire assembly on the motor drive
(g)
, introduce the spindle
(f)
, and lock the assembly, then
11
(b2) (b3)
onto the bowl
4 : Grating/slicing
Check that the
metal axle of
the spindle (c) is
inserted in the
centre of the lid
with measuring
tube (b2)
.
EN
(a1)
.