Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - Zanussi ZRT43200WA Manual De Instrucciones

14 www.zanussi.xom
TRANSPORTATION AND CHANGING OF INSTALLA-
PART- 5.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old
installation position, all the moving objects
(i.e., shelves, crisper...) should be taken
out or fixed with bands in order to prevent
the shake.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
PART- 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

What to do if your refrigerator does not operate;
Check that;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on "
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
TION POSITION
•
" position ,