Vollrath SLC-1 Manual De Instrucciones página 2

Load Cups
1
Loosen the five wing nuts.
Do NOT remove.If using
foam cups, change the
spring before proceeding
to step 2. See box below.
Replace the Spring - Required if Using Foam Cups
Pull of the retaining clip.
1
NOTICE: Cap is under
pressure from spring.
www.vollrath.com
Pinch in sides until
2 3
Partially load
cups are held in
cups.
place. Tighten last
wing nut. Verify cups
dispense one a time.
10 -12
cups
Loosen wing nut
2
and remove
cap.
Replace spring with
3
included lighter
weight spring.
4 Press down on
cap and tighten
wing nut.
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
4
Tighten the
remaining wing
nuts.
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
©
2016 The Vollrath Company L.L.C.
5
Load remaining
cups.
Install spring assembly
5
and retaining clip.
Part No. 350499-1 ml 8/24/16