Care - Vitamix ONE VM0217 Manual De Instrucciones

Hand Wash Only
Note: Your Vitamix container is designed to be completely cleanable without removing the retainer nut and blade assembly. DO NOT attempt to remove
the retainer nut or blade assembly from the container. Our Normal Cleaning and Sanitizing procedures will ensure a complete and thorough cleaning of
your container and it's components. If your container is damaged, please do not use. Contact Vitamix Customer Service IMMEDIATELY for assistance.
BEFORE FIRST USE:
1.
Wipe the base with a warm damp cloth and wipe clean with a dry,
soft cloth. Wash the container, lid, lid plug, and tamper with warm,
soapy water. Rinse all parts. Wipe dry with a dry, soft cloth.
To Clean the Container:
1. Fill the container half full with warm water and add a couple of drops of dish
liquid.
2. Snap or push the complete 2-Part lid into the locked position.
3.
Rotate the Variable Speed Dial clockwise away from O. Continue to
rotate to the high position.
4.
Run the machine for 30 to 60 seconds. DO NOT continuously
operate the blender for more than 3 minutes.
5.
Rotate the Variable Speed Dial back to O. Allow the blades to stop.
6. Rinse and drain all pieces.
To sanitize the container using bleach:
1. Follow the cleaning instructions above.
2.
Fill the container half full with water and 1 ½ teaspoons of liquid
bleach.
3.
Snap or push the complete 2-part lid into the locked position.
4. Rotate the Variable Speed Dial clockwise away from O. Continue to
rotate to the high position.
5. Run the machine for 30 to 60 seconds. DO NOT continuously
operate the blender for more than 3 minutes.
6.
Rotate the Variable Speed Dial back to O. Allow the blades to stop.
7. Allow mixture to stand in the container for an additional 1 ½ minutes.
8.
Pour bleach mixture out. Allow container to air dry. Do not rinse after
sanitizing.
10
C
a r e
Lids, Lid Plug, Centering Pad and Tamper
Wash the parts in warm soapy water. Rinse clean under running water,
then dry .
Blender Base
1. Turn off and unplug the blender.
To Avoid Injury and Damage.
To avoid inadvertent activation, turn off and unplug the
blender before cleaning.
Electrical Shock Hazard.
Always unplug before cleaning the blender base or
when not in use.
Do not put the blender base in water or other liquid.
Failure to follow instructions can cause death or
electrical shock.
2.
Wash the outside surface with a damp, soft cloth or sponge that has
been rinsed in a mild solution of liquid dish soap and warm water.
Do not place the blender base in water. The centering pad can be
removed for more thorough cleaning.
3.
Immediately dry all surfaces and polish with a soft cloth.
WARNING
WARNING