Dry Ironing; Steam Ironing - Mellerware Flossy! Manual De Instrucciones

The power indicator light will
–
illuminate.
Select the desired steam flow rate
–
using the steam regulator (A).
Turn the thermostat knob (B) until it
–
is in the position that corresponds
to the desired temperature.
During the heating process, the
–
ECO (position 2) or MAX (position
3) light according to selection, will
blink until the vaporizer is ready,
once this happens, the steam light
will remain fixed, indicating that it
is ready to iron without no risk. This
process takes about 60 seconds.
Do not use temperatures higher
–
than those indicated on the
garments to be treated.
· Temperature for synthetic fibres
–
(Polyester, Nylon...).
·· Temperature for silk and wool.
–
··· Temperature for cotton.
–
(Minimum temperature for steam
ironing)
Max: Temperature for linen.
–
If garment has various kinds of
–
fibres, select the temperature for
the fibre that requires the lowest
temperature. (For example, select
the temperature for polyester
for an article made out of 60%
polyester and 40% cotton).
When the pilot light turns off, it
–
means that the appliance has
reached the correct temperature.
Press any of the steam buttons (C)
–
continuously for 10 seconds.
During the use of the appliance,
–
the pilot light will switch on and
off automatically, thus indicating
the operation of the heating
elements to maintain the desired
temperature.

DRY IRONING

The appliance has an option to
–
dry ironing (without steam). To use
this option, just activate the iron
temperature control and leave the
steam control in position 0.

STEAM IRONING

It is possible to iron with steam
–
whenever the deposit is filled
with water and the adequate
temperature is selected.
STEAM FLOW CONTROL
The device allows to regulate the
–
temperature (B) and the steam (A).
NOTE: the iron may leak after
–
using the vertical ironing or the
selfcleaning program, this is a
normal situation.
VERTICAL STEAMING
It is possible to iron hanging
–
curtains, items of clothing on his
hanger, etc. To do so, follow the
instructions:
Select the maximum temperature
–
of the iron, while turning the
temperature regulator of the iron in
a clockwise direction.
Move the iron up and down by
–
pressing any of the steam buttons
(C). Important: for cotton and
linen it is recommended to put the
base of the iron in contact with
the fabric. For other more delicate
EN