(L) Timer CH1 & CH2 (R) Timer CH3 & CH4
6. Adjusting the intensity
The intensity can be adjusted from 0 – 100. Press
control to adjust the setting of the respective channels 1-4.
How to set personal EMS parameters
The settings can be adjusted according to the following steps:
1. Turn on the device
After the electrodes are placed firmly
on skin and the lead wires are plugged
in the socket of device, turn the on/off
control.
2. Select mode
Select a mode by pressing the "Mode" control.
The mode you selected will show up on the top of liquid
crystal display. There are 3 modes available: C (Constant), S
(Synchronous) and A (Asynchronous).
When an EMS mode is selected, the LCD display will show
"EMS". After a mode is selected, press
setting. Then press the
The settings are set as soon as they are selected.
or
control to change the settings.
STIM-PRO X9+
Continuous
or
control to enter next
EN
53