Magnetic Box Column Drill F10 - Forch F10 Manual De Instrucciones

Magnetic box column drill F10

ENG
Magnetic holding force:
Power consumption:
0 2 4
Gears:
1 3 5
Rotational speed:
Idling speed:
Stroke:
Height:
Magnetic footprint (L × W):
Weight:
kg
Collet:
Drilling range spiral drill:
Drilling range core drill:
Core drill cutting depth:
Supply voltage:
Complies with:
Scope of delivery
1× magnetic box column drill F10
■
1 x transport case
■
1× securing strap
■
1× 2.5 / 4 / 6 Allen wrench
■
1× coolant bottle
■
1× operating manual
■
Safety information
When working with this machine, improper handling and/or poor maintenance can cause considerable
danger, which can lead to the destruction of the machine and to serious accidents with severe physical
damage. Please observe all the following safety instructions and contact our service team if you have
any questions. When drilling in vertical alignment, the magnetic drilling machine must be secured with
the securing strap supplied. The magnetic holding force is not maintained in the event of a power cut.
The drilled out core is automatically ejected by the guide pin. The guide pin may break if handled im-
properly. Only use undamaged connection cables and extension cables and check regularly for damage.
There is the risk of an electric shock. Mains voltage and voltage specifications on the device must match.
Technical data:
10,000 N
1,100 W
1 gear
595 min ¹
-
700 min ¹
-
120.0 / 195.0 mm
400.0 – 580.0 mm
160.0 × 80.0 mm
10.5 kg
Weldon shaft 19.0 mm (3/4")
Max. diameter 13.0 mm
Diameter 12.0 – 35.0 mm
Max. 50.0 mm
220 – 240 V
VDE, CEE